5 Steps To Clearing Up A Green Above Ground Swimming Pool.  

by Pool Builders on 06-18-2012 in Articles

Every single pool owner will experience a green or black pool at some point. It is preferable to avoid this situation by maintaining and servicing your above ground swimming pool correctly. Restoring your swimming pool to its former clarity will require time, effort, cash and will without doubt test your patience. The fantastic news is that there is a proven system for cleaning a filthy, green pool.

The guidelines outlined below ought to be implemented in sequence to ensure the very best results for your above ground pool.

1. Remove the leaves and debris that is laying at the bottom of the swimming pool. This can stir up the water and worsen the appearance of the pool, but do not fret as it will settle within a few hours. Do not vacuum the swimming pool while there is still debris in the bottom as this may certainly result in blockage within the skimmer or filter.

2. Adjust the water pH and alkalinity levels with Ph Plus, Ph Minus and Alkalinity Plus. The water will not clear until these levels are within normal range.

3. Shock the pool using a high concentration of chlorine. This will destroy all the algae and bacteria within the swimming pool. For faster results, use liquid shock. Extremely dirty swimming pools may possibly require repeated doses of liquid shock over a time period of a few days is doses of 3 or 4 gallons. If the needed outcome is not achieved overnight, add an additional 3 or 4 gallons in the morning. Continue this process till the water color changes to either a cloudy white or clear. As soon as this result has been realized, add a high quality algaecide to the water.

4. Backwash 3 or 4 times and run your filter for 24 hours. If the swimming pool stays cloudy and the water does not clear, utilize a clarifier. Please note that this really is exclusively for sand filters. You will need 1 ounce of super concentrated clarifier per 5000 gallons of water. Should you be unsure of the concentration, merely comply with the instructions on the label. Run the filter for an additional 12 hours and let it sit overnight. If carried out properly, the dead algae will sink to the bottom. Vacuum it up first thing in the morning before the rays of the sun reach the pool. Carry on running the pool filter and backwashing it. The more you do this, the quicker it will clear up. You cannot over backwash the filter so do not be concerned. Remember that D.E. filters have to be topped up through the skimmer immediately after every backwash.

5. Once clear water has been restored to your swimming pool, vacuum up the remaining debris and enjoy.

If following these directions does not clear up your above ground pool with 5 or 6 days, check your filter because it may not be functioning correctly. For more data on maintaining and servicing your above ground swimming pool, pay a visit to http://www.aboveground-swimming-pools.com.

Leave a Comment

List YOUR Pool Business