5 Tips for Effectively Maintaining a Swimming Pool

by Pool Builders on 05-20-2014 in Articles

A swimming pool in your home is a good way to keep fit, and also to laze around and relax. Keeping the swimming pool clean is of high importance as an unhygienic pool can lead to infections.

Maintaining a pool is not such a difficult job, and you can do it on your own. This list gives you 5 tips for maintaining your swimming pool.

Educate pool users

You should educate your friends or family or anyone using the pool on the things they must do before entering the pool. Ensure that all pool users take a shower before entering the pool. Also tell people using your pool to not blow their nose or spit in the water.

Do not allow anyone to enter the pool if they have communicable disease. Anyone else using the swimming pool can be infected with the disease if there is a person with a cold or a fever.

Slippery pools

If your pool is dirty and slippery, you must drain all the water from the pool and clean it. Usually, there are algae stuck to the walls of the pool which have to be removed and cleaned. Clean the algae as soon as you find them in your pool as they tend to grow quickly. One of the best ways to clear algae is to use bleaching powder.

Chlorinate your swimming pool regularly

Chlorine is the most widely used chemical to clean pools. Chlorine kills and disinfects bacteria that are present in your swimming pool. There are a wide range of chlorine products that you can choose from to disinfect your pool. You can either use an automatic chlorine feeder that will automatically add chlorine to your pool, or you could use chlorine sticks and tablets. When adding chlorine to the pool, make sure that you add it after sunset and not during the day.

Check various levels constantly

You must check the calcium and alkalinity levels regularly. The calcium hardness must be between 200 and 300 ppm, and the alkalinity levels between 80 and 110 ppm. These two levels must be checked on a regular basis during summers, at least twice a day, whereas during winters, you can check the levels once a week. You should also check the pH levels of your pool, which should be between 7.2 and 7.6. The pH levels must not be too high or too low.

Clean the filters and drainage pipes and check the motor regularly

If the water is not very clear, it is time that you clean the filters. Your pool's filters must be cleaned once in 4-6 months. Soak the filters in muriatic acid to clean them. The pump and drainage system must be checked once a week to check for any dirt inside them.

Check for leakages

If you notice a reduction in water level, there may be a leakage in your pool. This is a big problem and must be fixed immediately. You can identify a leakage in your pool by using a dye test solution.

Leave a Comment

 
List YOUR Pool Business