Basic Swimming Pool Repair Tricks For Concrete Pools

by Pool Builders on 12-11-2011 in Articles

Concrete swimming pools are bound to get damaged through time. No matter how careful the owners are with their use, swimming pool repair is inevitable. In truth, damages might be the effect of improper installation or adverse weather conditions. With that, constant check-up for any crack or chipping must be made so as to avoid bigger impairments.

Do not fret when you see minor problems with your pool. They can be easily repaired with a little time and effort and proper use of mending mixtures and tools. You would be surprised that you won't need professional help at all. Here are some quick and cost-effective ways to go on with the repairs.

Minor Crack Repair

Compared with other pool types, concrete tools are more prone to cracks. Generally, this can be attributed to deficiency in the mixture used during the initial plastering. Small cracks, over time, can grow into deep ones. Thus, there's need for immediate swimming pool repair.

As you spot a crack, deepen or enlarge it by half an inch. Widen it too at both ends. Dust off sand particles in it. Follow it up with the application of caulk. Caulk is very important as it will make the crack water-tight. This will keep water from seeping deep into the crack. Let it dry. Do not forget to leave enough space for the application of plaster.

As soon as the caulk gets dry, get ready with you plaster mixture. You will need sand, white Portland cement, bonding agent and some water as materials. Just mix them together. Before applying this blend on the caulked crack, sprinkle some water on it. Leave no space for air or water. Apply the mixture thoroughly. Check if it's leveled with the pool surface. Keep it moistened for few days so that the mixture sets properly.

Plaster Repair

Never think of pool renovation, if you have got plaster problems. Its repair could be as easy as the crack repair, however, it make require more time and effort. Secure a hammer and a chisel for the removal of the loose plaster. Carefully take them out without disturbing the solid parts. Once done, get the exact measure of the area that needs patch-up.

Just like what you did with the crack repair, prepare a mixture for your plaster repair. Mix one-third of Portland cement and two-thirds of sand. Add a bonding agent and mix them well with water to make it semi-solid.

Moisten the damaged area with ample water. Use a trowel to apply your prepared blend. Again, fill the affected area thoroughly, leaving no space even for air bubbles. This is crucial to keeping the plaster from shedding quickly. Make the edges of the new patches smooth with water. Don't forget to even it out with the surface. Keep the area moistened until the pool is filled with water.

A swimming pool repair may require more than these. Issues like large cracks, plumbing troubles and water filtration problems would definitely repairs done by professional hands.

Leave a Comment

 
List YOUR Pool Business