How to Construct a Solar Powered Swimming Pool Heater - Heating Your Swimming Pool With Solar Power  

by Pool Builders on 09-14-2011 in Articles

For your pool temperature to rise, you need to add heat to the pool faster than it is being lost.

One particular way to improve the heating capability of your program is to have a larger collector. A smarter and more economical way to attain the exact same goal is to use a pool cover to decrease the rate of heat loss.

Instance:

A covered pool with a 75% collector area might outperform a 100% sized collector in which the pool is uncovered. Fundamentally, adding a pool cover is like "turbo charging" your solar heater's overall performance.

Swimming pools are great and fun times are enjoyed right here. However, heating them up requires a great deal of energy and can add up to substantial heating expenses. And solar pool heaters are turning into a lot more well-known because of the reality that the procedure on how to develop a solar pool heater does not demand significantly machining, welding or any difficult operates, therefore creating it practical and cost-effective for most individuals to design and build a solar pool heater on their own.

A typical solar pool heating program is composed of the following components:

- A solar collector- functions mostly as a tool through which pool water is circulated to be heated by the sun.

- A filter- removes dirt just before water is pumped by means of the collector.

- A pump- employed to circulate the water in the pool through the filter and collector and then back to the pool.

- A flow control valve- a device that diverts pool water through the solar collector.

Prior to we get to know how to develop a solar pool heater, we really should be knowledgeable on how these solar heaters work. They basically run on a passive solar principle which permits the water to run and pass through the lengths of flexible tubing. The water from the pool is then suspended in front of little reflectors of it to be ready to receive and transmit the warmth from the sun to the water in the tubing.

These are the recommendations on how to build a solar pool heater:

1. Shield the reflectors utilizing polythene sheeting. As these reflectors are crucial to effectively warm the pool, it is important to shield them form poor weather and low wind chill.

two. Spray the water piping of the reflectors with chrome paint, which will aid in increasing the reflective powers so it can heat the pool very nicely.

three. When you have heat going to the tubing type the reflectors, disperse the heat during the pool by the use of a tiny pond pump or solar electrical pump.

four. Assemble all the materials pertaining to the tubing, reflectors and cover into a solar panel. The size varies and depends on elements like ease of handling and heating efficiency. Generally, a pool that holds six thousand gallons essentially would want a panel that measures around eleven feet by five feet.

five. Spot the panel of the solar pool heater in a way that it gets the most sun feasible. At times it is far better to place them on a fence vertically or on the roof to get the ideal outcomes. When the sun is at its peak, like in the middle of the day, location them up to give you all you require to heat up your pool.

Leave a Comment

 
List YOUR Pool Business