Inground Pool Pump - How to Buy One And Save Money

by Pool Builders on 10-26-2010 in Articles

An inground pool pump serves as the heart of your pool system. Aside from keeping your pool free from germs, it also ensures clearer water that's algae-free. It works with your pool filter by circulating water and making sure chemicals and chlorine aren't concentrated in one area. Investing in a high quality pool pump should keep your pool functioning like new. It lets you enjoy your pool without worrying about maintenance.

A typical water pump works by drawing water from the pull then pushing it through a filter and heater, if you have one. After the water has been cleaned free of sediments and contaminants, it is then released back into the pool through its return ports. Buying just any pool pump won't do the trick. There is a specific pump type and capacity to suit every swimming pool. As a general rule, you have to consider the horsepower, flow rate, pump head pressure and pump type. These should all be in accordance to your pool's dimensions and volume.

Energy-efficiency is a common concern among new pool pump buyers. You can easily see this on the main unit. Look closely as it is usually written on a name plate in fine print. The wrong pool pump can lead to higher energy consumption and outrageous electricity bills. Higher power doesn't exactly mean higher efficiency so make sure you're buying the right pump for your pool. Otherwise, you might end up spending on something that would be of no use.

Flow rate is another important consideration when buying pool pumps. The flow rate is the amount of water moved by the main unit within a particular period. It is commonly gauged in liters or gallons per minute. Figuring out the correct flow out can be tricky. As a good measure, you must decide first how often you want water to be redistributed. If you own a commercial pool, it isn't surprising to have a pool pump running for 24 hours. However, this isn't necessary for a pool with very few users. A residential pool typically needs water circulation at least once or twice a day.

An efficient pump should be capable of releasing 250 l/m. Under normal circumstances, a pool pump with a capacity of 250 liters per minute requires at least 500 watts of electricity to work. If you own a bigger pool, be prepared to have a higher electricity bill since a 350 l/m pool pump runs on 1200 to 1500 watts.

Lastly, look for a pool pump with the right head pressure. Smaller head pumps are enough for above-ground pools and small inground pools. If you own an average-sized inground pool then you're better off with a medium head pump. These are capable of handling pools with capacities of up to 20,000 gallons. If your pool is bigger than this, then use a high head pump. An ultra high head pump is available for combination pools or those with a built-in spa.

It's difficult to pick just one inground pool pump with all the choices available. While they are all basically the same, it is crucial to find one with features that would suit your pool. The best place to search for advice is through the Internet. Consumer reviews can give you unbiased opinions and first-hand experiences with these products

Leave a Comment

 
List YOUR Pool Business