Simple Swimming Pool Pump Maintenance  

by Pool Builders on 03-02-2012 in Articles

The pool pump may be the engine for your pool circulation and filtration. For your pool to remain clean and the pool water to remain clear, the pump needs to be in good working order at all times. The following pool pump maintenance tasks should be performed on the routine basis.

Level - Monitor and maintain the proper water level inside your pool at ALL times. If the water level gets lacking, the pump can lose its prime and run dry, damaging the pump or pump motor.

Clean Out Skimmer Baskets - Keep your skimmer basket clear of debris. If the skimmer basket is neglected and becomes full of debris, it is going to restrict waterflow and drainage to the pump and damage the pump or water pump. A clogged skimmer basket will even result in inefficient filtration and water clarity problems such as a cloudy pool or perhaps an algae bloom. Cleaning up the skimmer basket might need to be achieved as frequently as a couple of times a day during song of the year, especially in windy areas or in backyards with a lot of trees and bushes. For some pools it may be less than once or twice a month.

Clean Out Pump Basket - the pump basket needs similar maintenance as the skimmer basket. For many swimming pools it wont need to be washed as frequently because the skimmer basket. However, if you are checking one, you may as well check the other.

Tip: For the skimmer basket and pump basket, avoid hitting the baskets on the concrete deck when cleaning. This can lead to cracks in the baskets that will permit debris to make do, risking a clogged impeller or damaged pump. Instead, clean them by helping cover their both hands and wash them out with a hose.

Prime the Pool Pump - whenever the pump lid is taken away and reinstalled during cleaning, make sure the pump is stuffed with water as much as the top of the inlet before restarting the pump. Simply employ the hose or a small bucket with water from the pool to include water towards the pump. This will assist the pump upon starting and avoid running the pump dry for any length of time.

Pump Lid - Inspect the pump lid for cracks that may cause an air leak. A cracked pump lid is a problem thats easily overlooked and will make the pump to operate dry.

Pump Lid O-Ring - A poor pump o-ring can also be the cause of an air leak. Inspect the pump lid o-ring for dryness or cracks and replace if necessary. Ensure the o-ring is neat and well lubricated by having an approved lubricant when reinstalling. Also clean the surfaces of the pump and pump lid before replacing the lid in order to create a tight seal. With no tight seal, air might enter the system and decrease pump performance and pool water circulation.

Neglecting your swimming pool pump could be a costly mistake resulting in big headaches, an ugly pool, and expensive repairs. Avoiding these problems could be quick and easy. The bottom line is understanding your swimming pool and just how often it needs attention. Then, implementing a routine of performing the above mentioned tasks as needed.

Leave a Comment

 
List YOUR Pool Business